home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
BBS Toolkit
/
BBS Toolkit.iso
/
doors_1
/
chats021.zip
/
WHATSNEW.021
< prev
Wrap
Text File
|
1992-09-04
|
12KB
|
254 lines
Version 0.21ß
- the first line will be not deleted when #w or #d is used
- #w, #d-support for SBBS
- fixed bug when SET RA= is not set
- now you can define as a user your own macro in the statusline with
the #E-Command, in *.SCL it's called: KeyStatus
- the help-page has changed to two rows
- the name of the logfile will not be displayed to the user anymore
- USERDOES.? Support for SBBS or USERON-Utility for RA
- UserDoesPath - defined in CHAT.CFG
- Exitinfo.BBS from SBBS is also supported
- added command-line parameter /N=Node-Number - i.e. CHATS.EXE /N=*N
- /L=Language works now correct
- with #L you can delete your own window
- the plopped user gets a message, that he was plopped
Version 0.20ß
- you can get an Fido-compatible Echo TINECHAT.GER at 2:242/14
Please contact me.
- the name SANNA-CHAT is changed into TINE-CHAT
- the CTRL-#-Commands can now be up to 33 characters and the bug with
long usernames is fixed
- Bug Fixed: If you run in /S-Sysop-Mode, you had to press a key after
the user left Tine-Chat - it's corrected
- you can define Flags and Securitys for the KEYS and for the CTRL-KEYS
in the *.SCL-File.
for example: KeyPlopp = P Plop User |200B1C5
^Security 200 and Flags B1 & C5
must be set for this Key
CTRL-A = <hello> |20B1B2B3
^ Security 20 and Flags B1,B2,B3
- New Command #P = Plopp User - throw User out of the Tine-Chat :-)
- in *.SCL you can define PLOPPROTECTION - a protection for VIP-Users
who cannot be plopped by other users. Here you must define the
"Protection-Text" and security/flags for Plop-Protection
- The User can page the Sysop in Tine-Chat in the Paging-Ours with
the #Y Command. Tine-Chat will play the Song defined in Chat.CFG
with PAGESONG = PAGE.RA
The WANTS-CHAT begins to flash
- When a user leaves the chat, his window will be closed
- The files CHATHELP.ASC and CHATON.ASC does not exist any longer
Please check the *.SCL-Files for the texts
- The flashing WANTS-CHAT is reset, when the Sysop chats with the user
Version 0.19ß
- the width of the status-lines is reduced to 79 - so all ansi-terminal-
progs with linefeed on or off can use Sanna-Chat without problems
- a major bug fixed with accessing the CHAT_TMP.$$$-FIle. No letters
will be lost in space anymore
- the sanna-chat language-files are changed to the extension .SCL
(Sanna-Chat-Language)
- faster access to CHAT.CFG
- the parameter /D=DorinfoPath ist removed, because the RADU-Unit has
changed according to the Dorinfo-File.
Now the enviroment-variables DORINFO=\ra\node1\dorinfo1.def and
DORNODE=4 (Nodenumber=) are used, if the EXITINFO.BBS is not found.
- now the file CHAT.ABV is used. You can define short definitions
for whole expressions. The short-form must be typed in UPCASE-LETTERS!
Please take a look in CHAT.ABV and you will know everything about it
at once. Do not sort this entries in a alphabetical order, because it's
handled as a tree.
- little Bug fixed with the Sysop-Numbers
Version 0.18ß
- Comand in CHAT.CFG added:
ANSIMESSAGE = Color of the direct-online-messages
- you can define up tp 10 sysop-names in the CHAT.CFG-File.
Why?
Now it's possible to chat with the users within their tasks. You enable
your window, if you press a key. So you can chat with them without
logging in on an extra task.
Your username will be SysopName0 = , if you haven't start the chat
without typing a number between 0 and 9, which is the Sysop-Name you
have configured in the CHAT.CFG-File. 0 = Default
But there a the following problems:
* This feature is only possible, if the user has ANSI enabled.
* Leaves the user, the sysop must leave also
* The #-Commands are partionally disabled, because for example
when the user wants see the help-file, then the sysop must see it
too .. - so these commands are disabled until the sysop leaves with
ctrl-z.
* The Sysop leaves his window by pressing CTRL-Z. If he types CTRL-Z
a second time, the user must leave also.
Every othe key enables the sysop-window
* The Sysop has no #-Commands, but the macros will work.
- The Direct-Online-Message uses now the same routines like RA.
- in CHAT.LOG the LogOut-Message is corrected
- the command-line /S has changed into /S=1..9
here you can force the user into User-Sysop-Chat and the Sysop-Name
Number x will be taken, if you start with /S=x parameter.
If the User supports no ANSI/AVATAR, then the normal Line-Chat is taken
Version 0.17ß
- Command-Line-Parameter added: /s = Sysop-Chat
the Sysop-User-Chat is startet when you call Sanna-Chat and Sanna-Chat
exits, when this chat is ended - so you can use Sanna chat also as
a Sysop-User-Chat
- Command in CHAT.CFG added: SYSOPKEYS = NO -> the person on the local
side is not permitted to do use Sysop-Keys like ALT-C, ALT-H etc.
it's used for example if you chat in a LAN on a workstation and the
user runs in local mode and should be not permitted to change his
security-level with ALT-S or increase his time with cursur-up
- Sometimes the first 255 characters came not from one line to the other
line if a third user logged into sanna chat - I hope, it's fixed
- Command in CHAT.CFG added: NEWLINE = Yes -> a new line is started when
the cursor was in the first colum
NEWLINE = No - no new line is created after typing a chr(13) (CR)
- Bug fixed: while sending direct-online-messages, sometimes RA want read
the message and sanna-chat writes them at the same time. Now sanna-
chat waits until RA has finished its activity
- Added a chr(13) after the system-messages
- Bug Fixed: After "Press a key" the key-buffer was not empty
(reported by Michael Heinbockel)
- in the unregistered version there is no logfile avaible
Version 0.16ß
- Error messages will be logged in CHAT.ERR
- .ASC / .ANS text-Files will be searched in the language \TXTFILES\-Dir,
if no language is requested by /L=LANGUAGE
- bug fixed: if you start with the parameter /L=GERMAN, the chaton etc.-
files are searched in \ERMAN\ ... now its \GERMAN\
(reportet by Ruedi Kneubuehler)
- Command-Line-Parameter /D=Dorinfopath+DorinfoFile added
i.e. /D=c:\ra\node4\dorinfo4.def -> dorinfo4.def would be read if
no EXITINFO.BBS exists.
- Command-Line-Parameter /C=ConfigFile added
i.e. /C=\ra\chat2.cfg -> chat2.cfg is read, Default is CHAT.CFG in
the CHAT.EXE-Path
- if you press F8 your registration-info will be displayed
- in the unregistered version the status-line is changed to the F8-status
line
- bug fixed: if you have pressed crsr-right or other ctrl keys, then shit
comes over the screen - now fixed
- If you define a LOGFILE=CHAT.LOG in CHAT.CFG, all sessions will be
logged: a user comes in, says something, logs out
The chat text is logged when the chatter begins a new line.
- BUG: If you start Sanna-Chat without setting the Envirment-Variable
SET RA=.... , Sanna-Chat will end with an runtime-error.
This is a bug in the RADU.TPU, i hope, Richard Faasen will fix
this bug soon.
Version 0.15ß
- Error-messages will not end with a runtime-error
- Error-handling is improved
- If you define ctrl-macros beginning with an '#', then they are
displayed in the status-line for a certain time, which you can
define with DISPLAYTIME = in CHAT.CFG
- DORINFO?.DEF is supported
- other BBS-Program, which create DORINFO?.DEF - are supportet
Please read CHAT-?.DOC
- Multi-Language is supported
- Command-line-parameters to start CHAT.EXE:
/A=0 -> No ANSI avaiable
/A=1 -> Use ANSI
/A=2 -> Use Avatar
/W=0 -> No WINDOW-CHAT
/W=1 -> WINDOW-CHAT
/L=ENGLISH -> Use ENGLISH.RAL File
/L=FRANCE etc-> Use FRANCE.RAL File
i.e. CHAT.EXE /A1 /W1 /L=GERMAN (to overrite EXITINFO.BBS-info)
- Desqview gets more time-slices, if the user does nothing
Version 0.14ß
- Es ist nun moeglich, in der .CFG-Datei bestimmte Makros auf CTRL-..
Tasten zu legen. Bitte nicht CTRL-Z, CTRL-M, CTRL-H benutzen !
- Es gibt #M -> Macrobelegung anzeigen
- Es gibt #Z -> Ende
- CTRL-X funktioniert nicht mehr fuer Ende
Version 0.13ß
- Sanna-Chat laeuft nun auch mit RA Version 1.11
Es fehlte ein ">" bei Pruefen der Versionsnummer >1.10
Version 0.12ß
- der Time-Out geht nun 100%ig auf allen Rechnern
- fuer nicht - ANSI-faehige wurde ein Zeilen-Chat eingebaut
- #A -> Umschalten auf Zeilenchat
- Bei den Pfadangaben in der Config-Datei braucht der Backslash
nicht mit angegeben werden
- und noch ein paar Kleinigkeiten
- nur noch eine Version fuer RA 1.10
Version 0.11ß
- NO CARRIER - Detect und Timeout-Routinen verbessert
- Timeout nach 8 Min (nach 4 min Warnung)
- zwei Verschiedene Versionen fuer RA 1.10 und RA 1.01
- SHARE.EXE wird benoetigt
Version 0.10ß
- Einbindung von RADU, einer TP-Unit von Richard Faasen
- #s ist voruebergehend gesperrt
- Fast alle Sysop-Tastenkombinationen wie in RA verfuegbar
- Erkennt automatisch RA 1.10 oder RA 1.01
- gibt Desqview-Time-Slices zurueck
- automatische Einstellung der Anzahl der Fenster je nach Anzahl
der chattenden User (Aber Achtung: geht ein mittlerer User, so
ist in der Mitte ein Leerfenster - wird noch korrigiert)
- Automatisches Weiterlaufen der Restzeit/Uhrzeit-Anzeige
- Connect-Zeit Anzeige drinnen
- Im .CFG einstellbare #-Tastenkombinationen
- #-Befehle nur am Anfang jeder Zeile moeglich
- ESC = neuer Bildschirmaufbau
- schnellerer Austausch der Zeichen ueber RAM-DISK
- optimierte Bildschirmausgabe
- Avatar-Unterstuetzung
- voruebergehend keine Einschraenkung, ob registriert oder nicht
- Neuerstellung der Config-Datei mit definierten Befehl-Woertern
- Umbenennung der beiden HELP-DAteien in .ASC (hier dabei)
- Direktmeldungen ueber SEM-Path moeglich (nur RA 1.10)
- Backspace-Fehler in 79.Spalte behoben
Version 0.07ß-0.09ß
- nicht oeffentliche Test-Versionen
Version 0.06ß
- Support von RA 1.10
- DoNotDisturb-Flag wird beruecksichtigt beim Verschicken von Direkt-
Messages
- Es erfolg ein richtiges Redraw, wo auch der Text in den Fenstern
(nur 4 Zeilen) mitaufgebaut werden
Version 0.05ß
- Farbe bei Direkter Online-Msg und Wer ist online korrigiert
- Loeschen des Fensters, wenn ein User den Chat verlaesst
- Doku korrigiert
- Anzeige, an wen Direkt-Msgs verschickt
- Direkt-Msgs an Node0 nicht mehr moeglich
Version 0.04ß
- Verschicken von Direkten Online-Msgs #D
- Bekommen von Direkten Online-Msgs
Version 0.03ß
- Aenderung der CHATS.CFG !!! Bitte neue verwenden und auf temp.
Laufwerk das File C_ONLINE.$$$ loeschen!
- Anzahl der Fenster von 2 bis auf 6 einstellbar
- Fenster nicht mehr NODE-gebunden - d.h. der als erstes kommt, schreibt
- im oberen Fenster, der als zweites im 2. Fenster etc.
- Zeitlimitueberschreitung wird getestet
- Hilfeseite #H
- Zeitanzeige #T
- Restzeitanzeige #C
- Seitenlaengenveraenderung #s, #S
- Wer ist Online #W
Version 0.02ß
Erste lauffaehige Version